Environmental Services Construction Product List
Publication Date: October 1, 2024
This list is updated every six months.
| Standard Spec. No. | Category | Product Name and Product Information | Local Representative and/or Manufacturer | Effective Date | List | Remarks |
|---|---|---|---|---|---|---|
| 00280.14(e) | Slope and Channel Lining Matting Fasteners | EcoStake | North American Green 5401 St. Wendel-Cynthiana Road Poseyville, IN 47633 800-772-2040 | 5/2016 | A | The length must be verified. Used with Type E and F Slope and Channel Lining Matting (coir). |
| 00350.00 | Subgrade Geotextile | WSF 200 (ACF 200) Woven Geotextile | ACF West Inc. 8951 SE 76th Dr. Portland, OR 97206 503-771-5115 | 5/2016 | A | Use for separation. Not acceptable for drainage geotextile. |
| 00350.00 | HDPE Smooth Geomembrane Liner | Use contact form on Solmax website to request a technical data sheet. | SOLMAX 19103 Gundle Rd Houston, TX 77073 Rep: Mark Lally 281-230-2517 mlally@solmax.com | 5/1/21 | A | Vegetated stormwater facility geosynthetic liner. |
| 00350.00 | HDPE Textured Geomembrane Liner | Use contact form on Solmax website to request a technical data sheet. | SOLMAX 19103 Gundle Rd Houston, TX 77073 Rep: Mark Lally 281-230-2517 mlally@solmax.com | 5/1/21 | A | Vegetated stormwater facility geosynthetic liner. Groundwater protection. |
| 00445 | Pipe | Channeline GRP Structural Liner | Cassie Jordan Pipe Reline Solutions 503-784-2547 cassie.jordan@piperelinesolutio… | 12/2021 | A | Need product application from applicant (update spec and category with application info). |
| 00445.00 | Cleanout | Cleanout Frame and Cover Product No. 00367103 | East Jordan Iron Works HQ: 301 Spring Street East Jordan, MI 49727 800-874-4100 Anders Jorgenson Oregon Branch Manager 503-774-4144 mobile 503-367-7925 | 2/2021 | A | 6-inch sewer cleanout. 18-inch diameter frame section. Dipped coating. Meets HS-20 load requirements; meets ASTM A48. |
| 00445.00 | Field Fittings | Heavy Wall Gasketed Sewer Fittings ASTM D3034 SDR 26 | Stan Roberts & Assoc., Inc. 1220 Round Table Dr. Dallas, TX 75247-3504 214-637-2816 800-462-1195 | 5/2016 | A | Heavy wall PVC fittings used when extra heavy (SDR 26) is specified. |
| 00445.00 | Field Fittings | Gasketed Sewer Fittings ASTM D3034 SDR 35 | Stan Roberts & Assoc., Inc. 1220 Round Table Dr. Dallas, TX 75247-3504 214-637-2816 800-462-1195 | 5/2016 | A | Injection molded in sizes 4-inch to 12-inch. Fabricated in sizes 15-inch to 36-inch. |
| 00445.00 | Field Fittings | Hulk Couplings | Fernco, Inc. Tony Dipzinski 810.503.9062 Local Rep.: Gordon & Associates 425.228.5555 | 4/2023 | A | HULK4, HULK5, HULK6, HULK8, HULK10 and HULK12 |
| 00445.00 | Field Fittings | Inserta Tee SDR 26 | Inserta Tee 3707 24th Ave. Forest Grove, OR 97116 503-357-2110 sales@insertatee.com | 5/2016 | A | |
| 00445.00 | Field Fittings | Inserta Tee SDR 35 | Inserta Tee 3707 24th Ave. Forest Grove, OR 97116 503-357-2110 sales@insertatee.com | 5/2016 | A | |
| 00445.00 | Field Fittings | Sanded Manhole Adapter Without Stop | Michelle Blais-Lloyd Western States Sales 7074 South 220th St Kent, WA 98032 253-893-1695, 800-265-1815 info@multifittings.com everyone@westernstatesales.com | 5/2016 | A | |
| 00445.00 | Field Fittings | Sanded C900 PVC Manhole Adapter | Specified Fittings 164 W. Smith Road Bellingham, WA 98226 360-398-7700 Sales@SpecFit.com | 5/2016 | A | All fittings 4-inch to 48-inch shall be one-piece injection molded or fabricated from PVC meeting ASTM D1784; class 150; conform to requirements of DR51 to DR14; meet ANSI/AWWA C900. Solvent weld or gasket-end fittings optional. Solvent weld bells shall be compatible with C-900 pipe. Gasket bells shall conform to ASTM D3139 and ASTM F477. Gaskets shall be locked-in style. |
| 00445.00 | Field Fittings | Sanded SDR 35/26 PVC Manhole Adapters | Specified Fittings 164 W. Smith Road Bellingham, WA 98226 360-398-7700 Sales@SpecFit.com | 5/2016 | A | One-piece injection molded or fabricated from PVC compound meeting ASTM D1784. |
| 00445.00 | Field Fittings | MaxAdaptor | Gripper Gasket LLC 1660 Leeson Lane Corona, CA 92879 951-479-4999 sales@cimcosales.com | 8/1/20 | A | |
| 00445.00 | Field Fittings | Tap-N-Tee Lateral / Saddle Connector | Joints Couplings 10699 Hickson Street, Suite 20 El Monte, CA 91731 Rep: Tom Bea 626-448-2100 info@jointscouplings.com | 1/2018 | A | |
| 00445.00 | Field Fittings | Calder Repair Coupler | Joints Couplings 10699 Hickson Street, Suite 20 El Monte, CA 91731 Rep: Tom Bea 626-448-2100 info@jointscouplings.com | 10/2018 | A | |
| 00445.00 | HDPE Pipe | ASTM F714, SDR 26/ 21/ 17/ 11 See links for JM Eagle and Performance Pipe HDPE pipe. | High Country Fusion Company, Inc. Northwest sales: Redmond, WA Rick Nabseth 425-577-4633 | 5/2016 | A | |
| 00445.00 | HDPE Pipe | ASTM F714, DR 26/ 21/ 17/ 11 | JM Eagle HQ: 5200 West Century Blvd Los Angeles, CA 90045 800-621-444 Oregon Rep: Tom Flor 206-779-7611 | 5/2016 | A | |
| 00445.00 | HDPE Pipe | ASTM F714, DR 17 | Core & Main 6720 McEwan Rd Lake Oswego, OR 97035 Rose Murphy 503-750-7006 infrapipes.com/sclairpipe/ | 11/1/20 | A | Sclairpipe |
| 00445.00 | HDPE Pipe | ASTM F714, DR 26/ 21/ 17/ 11 | Performance Pipe 5085 West Park Boulevard, Suite 500 Plano, TX 75093 800-233-6495 | 5/2016 | A | |
| 00445.00 | PVC Pipe | Big Blue, C905 PVC Pipe | JM Eagle HQ: 5200 West Century Blvd Los Angeles, CA 90045 800-621-444 Oregon Rep: Tom Flor 206-779-7611 | 5/2016 | A | Gaskets meet ASTM F477 and joints meet ASTM D3139. |
| 00445.00 | PVC Pipe | ASTM D3034 SDR26 & SDR35 | JM Eagle HQ: 5200 West Century Blvd Los Angeles, CA 90045 800-621-444 Oregon Rep: Tom Flor 206-779-7611 | 5/2016 | A | |
| 00445.00 | PVC Pipe | SANI-21 ASTM D3034 SDR35/26 | Diamond Plastics Corporation 1212 Johnstown Road Grand Island, Nebraska 68803 Phone: 800-782-7473 Local Rep: Mark Wright PO Box 727, Hillsboro, OR 97123 503-521-8892 markewright@msn.com | 5/2016 | A | |
| 00446.00 | Electronic Locating Materials | OMNI Marker Balls | Instrument Technology Corp Tempo-A Textron Company PO Box 1944 Sebastopol, CA 95473 800-519-1998 | 5/2016 | A | Original OMNI Marker Balls are approved but not supported by vendor. Vendor offers the OMNI Marker II Balls at this time. |
| 00446.00 | Electronic Locating Materials | OMNI Marker II Balls | Tempo Communications 1390 Aspen Way Vista, CA, 92081 800-642-2155 Sales@tempocom.com | 7/2020 | A | |
| 00446.00 | Visual Identification Materials | Rhino A-Tag Sewer Markers | Rhino Marking & Protection Systems 10740 Lyndale Ave S., Suite 16W Bloomington, MN 55420 800-522-4343 www.RhinoMarkers.com | 5/2016 | A | Green A-Tag is for sewers. |
| 00470.00 | Inlet Frames and Grates | Type Beehive, Inlet Grate and Frame Product No. 3700 O | East Jordan Iron Works HQ: 301 Spring Street East Jordan, MI 49727 800-874-4100 Oregon Sales Rep: Frank Ray 503-550-1828 fax 231-536-4442 | 5/2016 | A | Must include locking bolt or tether. |
| 00470.00 | Inlet Frames and Grates | Type Beehive, Grate R-2560-A and Inlet Frame | Neenah Enterprises, Inc. 2121 Brooks Ave. Neenah, WI 54956 Oregon Rep: Julie Chung 646-226-4570 503-296-2100 | 5/2016 | A | Must include locking bolt or tether. |
| 00470.00 | Inlet Frames and Grates | Type Beehive, 23"x6" Grate and Manhole Ring | Olympic Foundry 6530 NE 42nd Ave Portland 97218 Portland Branch Manager: Sue Barmon 503-281-3381 portland@olympicfoundry.com | 5/2016 | A | Must include locking bolt or tether. |
| 00470.00 | Inlet Frames and Grates | Type Channel and Grate, 18" x 24" Wave Grate | Urban Accessories 465 East 15th St. Tacoma WA 98421 253-572-1112 | 5/2016 | A | Meets AASHTO requirement for Coefficient of Friction 0.8 on a 4 percent slope. May be used in crosswalks or sidewalk without restriction as it relates to ADA. H-20 load-rated. |
| 00470.00 | Inside Drop | A4 & A6 Drop Bowls (expandable menu with drop bowl details at bottom of page) | Reliner / Duran, Inc. 53 Mt. Archer Road Lyme, CT 06371 800-508-6001 | 5/2016 | A | |
| 00470.00 | Manhole Frame and Cover | Double MH Frame & Cover (A-1422) | DL Foundry Sales 509-766-3131 info@dlsupplyco.com | 9/2017 | A | |
| 00470.00 | Manhole Frame and Cover | Manhole Cover | Olympic Foundry 6530 NE 42nd Ave Portland 97218 Portland Branch Manager: Sue Barmon 503-281-3381 portland@olympicfoundry.com | 5/2016 | A | Meets AASHTO friction requirement of 0.8 on a 4 percent slope. May be used in crosswalks or sidewalks without restriction as it relates to ADA. |
| 00470.11C | Lane Manhole Steps | Manhole Steps | Lane International 10758 SW Manhasset Dr Tualatin, OR 97062 Sales (503) 692-9860 laneinternational.com | 9/2017 | A | P-14850 meets the requirements of ASTM C-478 and AASHTO M-199. The polypropylene conforms to ASTM D-4101. |
| 02420.11 | Ductile Iron Pipe Interior Coating | Protecto 401 | Aaron Shields 253-370-9869 ashields@uspipe.com WA, OR, British Columbia | 2/2023 | A | |
| 02470.2 | Ductile Iron Pipe | Hazard Resilient Ductile Iron Pipe (HRDIP) | Kubota Corporation, Japan Local Representative: RBM Sales & Marketing Randy Bain, Mobile 541-670-4197, Email: rmbain1@gmail.com | 9/2024 | A | For sewers only |
| 02475.2 | Ductile Iron Pipe Fittings | Hazard Resilient Ductile Iron Pipe (HRDIP) | Kubota Corporation, Japan Local Representative: RBM Sales & Marketing Randy Bain, Mobile 541-670-4197, Email: rmbain1@gmail.com | 9/2024 | A | For sewers only |
About the Construction Products List
The Construction Products List (CPL) supports the submittal review process for construction products commonly used on Environmental Services infrastructure projects. The list includes only those products with which the bureau has established experience and expertise. New technology, new products recently brought to market, and products not previously used by the City of Portland will not be reviewed under this process.
Purpose of CPL
While many construction product submittals are project- or site-specific, there are a number of standard materials or products that can be approved for use without reviewing redundant product information. The CPL was developed from reviews of typical products and manufacturers used on projects over a prolonged period of time and approved by Environmental Services for continued use on future projects.
These four agency-approved product lists make up the CPL:
- Environmental Services CPL (on this page above)
- Portland Water Bureau Construction Products List
- Portland Bureau of Transportation Construction Products List
- Oregon Department of Transportation Qualified Products List
Products are organized numerically by specification section as defined in the City of Portland Standard Specifications (2020). The Environmental Services list includes links to the product information and specifications. These links can be used by all City staff and the contracting community. If a product is on the PBOT and/or ODOT lists, then it is not included on the Environmental Services CPL.
How to Use the CPL
Environmental Services designers, construction managers, construction technicians, inspectors, and contractors use the CPL to find approved products for Environmental Services infrastructure projects.
- If a product is on the CPL, the contractor must submit a submittal for the product in HERON. In the submittal, the contractor should include the product name and list from which it came. It is not necessary to include complete product information. Choosing a product from the CPL does not alleviate contractors from their responsibility to follow the requirements of the contract.
- If a product requires testing before it can be approved for use on a project, then it is not included on the CPL, and a standard construction submittal in HERON is required.
- Use of all other products and "or approved equal" products not included on the CPL requires a standard construction submittal in HERON for review and approval.
- When applicable, the CPL will also indicate products that have been rejected from the list and the reason for the rejection.
Adding New Products to the CPL
Environmental Services staff, product manufacturers/distributors, and contractors can request to add commonly used products to the CPL. Environmental Services has a Review Committee, chaired by a representative from the bureau's Engineering group, which reviews all products submitted for inclusion on the CPL. Find instructions and application below for how to submit a product for consideration. Pertinent, current product information must be included as part of the application process.
Product information will be reviewed to determine if a product will be included on, or excluded from, the Environmental Services CPL. The Review Committee meets every six months to make a determination regarding each product submitted.
Update and Maintenance of the CPL
The Environmental Services CPL is updated and maintained by the CPL Review Committee Chair and a Technician. The list will be reviewed on a regular basis to ensure that the product links provided are fully functional.
How To Submit a Product for Consideration for the Environmental Services Construction Products List
If you would like to submit a commonly-used construction product for consideration for the CPL, download and complete the Product Application Form below. Email completed forms to the Environmental Services Construction Product List Steward. Contact information is on this page.