information
Impacts to City Services

Find information about city services during this Emergency Declaration for Work Stoppage

Environmental Services Construction Products List

Information
In addition to Portland's bureaus of Transportation and Water, Environmental Services maintains a list of approved, commonly-used construction products for use within the public right-of-way. Find the current list and learn more about the construction product approval process.
On this page

Environmental Services Construction Product List

Publication Date: September 15, 2022
This list is updated every six months.

Standard Spec. No.CategoryProduct Name and Product InformationLocal Representative and/or ManufacturerEffective DateListRemarks
00280.14(e)Slope and Channel Lining Matting Fasteners

EcoStake

North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, IN 47633
800-772-2040
5/2016AThe length must be verified.
Used with Type E and F Slope and Channel Lining Matting (coir).
00350.00Subgrade GeotextileWSF 200 (ACF 200) Woven GeotextileACF West Inc.
8951 SE 76th Dr.
Portland, OR 97206
503-771-5115
5/2016AUse for separation. Not acceptable for drainage geotextile.
00350.00HDPE Smooth Geomembrane Liner

Solmax Geomembrane Liner Technical Data Sheet Generator

Use to create all geomembrane liners.

SOLMAX
19103 Gundle Rd
Houston, TX 77073
Rep: Mark Lally
281-230-2517
mlally@solmax.com

5/1/21AVegetated stormwater facility geosynthetic liner.
00350.00HDPE Textured Geomembrane Liner

Solmax Geomembrane Liner Technical Data Sheet Generator

Use to create all geomembrane liners.

SOLMAX
19103 Gundle Rd
Houston, TX 77073
Rep: Mark Lally
281-230-2517
mlally@solmax.com
5/1/21A

Vegetated stormwater facility geosynthetic liner.

Groundwater protection.

00445PipeChanneline GRP Structural LinerCassie Jordan
Pipe Reline Solutions
503-784-2547
cassie.jordan@piperelinesolutio…
12/2021ANeed product application from applicant
(update spec and category with application info).
00445.00CleanoutCleanout Frame and Cover Product No. 00367103East Jordan Iron Works
HQ: 301 Spring Street
East Jordan, MI 49727
800-874-4100
Anders Jorgenson
Oregon Branch Manager
503-774-4144
mobile 503-367-7925
2/2021A6-inch sewer cleanout.
18-inch diameter frame section. Dipped coating.
Meets HS-20 load requirements; meets ASTM A48.
00445.00Field FittingsHeavy Wall Gasketed Sewer Fittings ASTM D3034 SDR 26Stan Roberts & Assoc., Inc.
1220 Round Table Dr.
Dallas, TX 75247-3504
214-637-2816
800-462-1195
5/2016AHeavy wall PVC fittings used when extra heavy (SDR 26) is specified. 
00445.00Field FittingsGasketed Sewer Fittings ASTM D3034 SDR 35Stan Roberts & Assoc., Inc.
1220 Round Table Dr.
Dallas, TX 75247-3504
214-637-2816
800-462-1195
5/2016A
Injection molded in sizes 4-inch to 12-inch. Fabricated in sizes 15-inch to 36-inch.
00445.00Field FittingsInserta Tee SDR 26Inserta Tee
3707 24th Ave.
Forest Grove, OR 97116
503-357-2110
sales@insertatee.com
5/2016A
00445.00Field Fittings Inserta Tee SDR 35Inserta Tee
3707 24th Ave.
Forest Grove, OR 97116
503-357-2110
sales@insertatee.com
5/2016A
00445.00Field FittingsSanded Manhole Adapter Without StopMichelle Blais-Lloyd
Western States Sales
7074 South 220th St
Kent, WA 98032
253-893-1695, 800-265-1815
info@multifittings.com
everyone@westernstatesales.com
5/2016A
00445.00Field Fittings

Sanded C900 PVC Manhole Adapter

Expand Short Form Specification on table to view specs or Certifications, Drawings, Catalogs; supplier can provide submittal upon request.

Specified Fittings
164 W. Smith Road
Bellingham, WA 98226
360-398-7700
Sales@SpecFit.com
 
5/2016AAll fittings 4-inch to 48-inch shall be one-piece injection molded or fabricated from PVC meeting ASTM D1784; class 150; conform to requirements of DR51 to DR14; meet ANSI/AWWA C900.
Solvent weld or gasket-end fittings optional. Solvent weld bells shall be compatible with C-900 pipe. Gasket bells shall conform to ASTM D3139 and ASTM F477. Gaskets shall be locked-in style.
00445.00Field Fittings

Sanded SDR 35/26 PVC Manhole Adapters

Expand Short Form Specification on table to view specs or Certifications, Drawings, Catalogs; supplier can provide submittal upon request.

Specified Fittings
164 W. Smith Road
Bellingham, WA 98226
360-398-7700
Sales@SpecFit.com
5/2016AOne-piece injection molded or fabricated from PVC compound meeting ASTM D1784. 
00445.00Field FittingsMaxAdaptorGripper Gasket LLC
1660 Leeson Lane
Corona, CA 92879
951-479-4999
sales@cimcosales.com
8/1/20A
00445.00Field FittingsTap-N-Tee Lateral / Saddle ConnectorJoints Couplings
10699 Hickson Street, Suite 20
El Monte, CA 91731
Rep: Tom Bea
626-448-2100
info@jointscouplings.com
1/2018A
00445.00Field FittingsCalder Repair CouplerJoints Couplings
10699 Hickson Street, Suite 20
El Monte, CA 91731
Rep: Tom Bea
626-448-2100
info@jointscouplings.com
10/2018A
00445.00HDPE Pipe

ASTM F714, SDR 26/ 21/ 17/ 11

See links for JM Eagle and Performance Pipe HDPE pipe.

High Country Fusion Company, Inc.
Northwest sales: Redmond, WA
Rick Nabseth
425-577-4633
5/2016A
00445.00HDPE PipeASTM F714,
DR 26/ 21/ 17/ 11
JM Eagle
HQ: 5200 West Century Blvd
Los Angeles, CA 90045
800-621-444
Oregon Rep: Tom Flor
206-779-7611
5/2016A
00445.00HDPE PipeASTM F714, DR 17Core & Main
6720 McEwan Rd
Lake Oswego, OR 97035
Rose Murphy
503-750-7006
infrapipes.com/sclairpipe/
11/1/20ASclairpipe
00445.00HDPE PipeASTM F714,
DR 26/ 21/ 17/ 11
Performance Pipe
5085 West Park Boulevard, Suite 500
Plano, TX 75093
800-233-6495
5/2016A
00445.00PVC PipeBig Blue, C905 PVC PipeJM Eagle
HQ: 5200 West Century Blvd
Los Angeles, CA 90045
800-621-444
Oregon Rep: Tom Flor
206-779-7611
5/2016AGaskets meet ASTM F477 and joints meet ASTM D3139.
00445.00PVC PipeASTM D3034 SDR26 & SDR35JM Eagle
HQ: 5200 West Century Blvd
Los Angeles, CA 90045
800-621-444
Oregon Rep: Tom Flor
206-779-7611
5/2016A
00445.00PVC PipeSANI-21 ASTM D3034 SDR35/26Diamond Plastics Corporation
1212 Johnstown Road
Grand Island, Nebraska 68803
Phone: 800-782-7473
Local Rep: Mark Wright
PO Box 727, Hillsboro, OR 97123
503-521-8892
markewright@msn.com
5/2016A
00446.00Electronic Locating MaterialsOMNI Marker BallsInstrument Technology Corp
Tempo-A Textron Company
PO Box 1944
Sebastopol, CA 95473
800-519-1998
5/2016AOriginal OMNI Marker Balls are approved but not supported by vendor.  Vendor offers the OMNI Marker II Balls at this time.
00446.00Electronic Locating MaterialsOMNI Marker II BallsTempo Communications
1390 Aspen Way
Vista, CA, 92081
800-642-2155
Sales@tempocom.com
7/2020A
00446.00Visual Identification MaterialsRhino A-Tag Sewer MarkersRhino Marking & Protection Systems
10740 Lyndale Ave S., Suite 16W
Bloomington, MN 55420
800-522-4343
www.RhinoMarkers.com
5/2016AGreen A-Tag is for sewers.
00470.00Inlet Frames and Grates

Type Beehive, Inlet Grate and Frame Product No. 3700 O

East Jordan Iron Works
HQ: 301 Spring Street
East Jordan, MI 49727
800-874-4100
Oregon Sales Rep: Frank Ray
503-550-1828
fax 231-536-4442
5/2016AMust include locking bolt or tether.
00470.00Inlet Frames and GratesType Beehive, Grate R-2560-A and Inlet FrameNeenah Enterprises, Inc.
2121 Brooks Ave.
Neenah, WI 54956
Oregon Rep: Julie Chung
646-226-4570
503-296-2100
5/2016AMust include locking bolt or tether.
00470.00Inlet Frames and GratesType Beehive, 23"x6" Grate and Manhole Ring Olympic Foundry
6530 NE 42nd Ave
Portland 97218
Portland Branch Manager: Sue Barmon
503-281-3381
portland@olympicfoundry.com
5/2016AMust include locking bolt or tether.
00470.00Inlet Frames and GratesType Channel and Grate, 18" x 24" Wave Grate Urban Accessories
465 East 15th St.
Tacoma WA 98421
253-572-1112
5/2016AMeets AASHTO requirement for Coefficient of Friction 0.8 on a 4 percent slope. May be used in crosswalks or sidewalk without restriction as it relates to ADA. H-20 load-rated.
00470.00Inside DropA4 & A6 Drop Bowls (expandable menu with drop bowl details at bottom of page)Reliner / Duran, Inc.
53 Mt. Archer Road
Lyme, CT 06371
800-508-6001
5/2016A
00470.00Manhole Frame and CoverDouble MH Frame & Cover (A-1422)DL Foundry
Sales 509-766-3131
info@dlsupplyco.com
9/2017A
00470.00Manhole Frame and CoverManhole CoverOlympic Foundry
6530 NE 42nd Ave
Portland 97218
Portland Branch Manager: Sue Barmon
503-281-3381
portland@olympicfoundry.com
5/2016AMeets AASHTO friction requirement of 0.8 on a 4 percent slope. May be used in crosswalks or sidewalks without restriction as it relates to ADA.
00470.11CLane Manhole StepsManhole StepsLane International
10758 SW Manhasset Dr
Tualatin, OR 97062
Sales (503) 692-9860
laneinternational.com
9/2017AP-14850 meets the requirements of ASTM C-478 and AASHTO M-199. The polypropylene conforms to ASTM D-4101.

About the Construction Products List

The Construction Products List (CPL) supports the submittal review process for construction products commonly used on Environmental Services infrastructure projects. The list includes only those products with which the bureau has established experience and expertise. New technology, new products recently brought to market, and products not previously used by the City of Portland will not be reviewed under this process.

Purpose of CPL

While many construction product submittals are project- or site-specific, there are a number of standard materials or products that can be approved for use without reviewing redundant product information. The CPL was developed from reviews of typical products and manufacturers used on projects over a prolonged period of time and approved by Environmental Services for continued use on future projects.

These four agency-approved product lists make up the CPL:

Products are organized numerically by specification section as defined in the City of Portland Standard Specifications (2020). The Environmental Services list includes links to the product information and specifications. These links can be used by all City staff and the contracting community. If a product is on the PBOT and/or ODOT lists, then it is not included on the Environmental Services CPL.

How to Use the CPL

Environmental Services designers, construction managers, construction technicians, inspectors, and contractors use the CPL to find approved products for Environmental Services infrastructure projects.

  • If a product is on the CPL, the contractor must submit a submittal for the product in HERON. In the submittal, the contractor should include the product name and list from which it came. It is not necessary to include complete product information. Choosing a product from the CPL does not alleviate contractors from their responsibility to follow the requirements of the contract.
  • If a product requires testing before it can be approved for use on a project, then it is not included on the CPL, and a standard construction submittal in HERON is required.
  • Use of all other products and "or approved equal" products not included on the CPL requires a standard construction submittal in HERON for review and approval.
  • When applicable, the CPL will also indicate products that have been rejected from the list and the reason for the rejection.

Adding New Products to the CPL

Environmental Services staff, product manufacturers/distributors, and contractors can request to add commonly used products to the CPL. Environmental Services has a Review Committee, chaired by a representative from the bureau's Engineering group, which reviews all products submitted for inclusion on the CPL. Find instructions and application below for how to submit a product for consideration. Pertinent, current product information must be included as part of the application process.

Product information will be reviewed to determine if a product will be included on, or excluded from, the Environmental Services CPL. The Review Committee meets every six months to make a determination regarding each product submitted.

Update and Maintenance of the CPL

The Environmental Services CPL is updated and maintained by the CPL Review Committee Chair and a Technician. The list will be reviewed on a regular basis to ensure that the product links provided are fully functional.

How To Submit a Product for Consideration for the Environmental Services Construction Products List

If you would like to submit a commonly-used construction product for consideration for the CPL, download and complete the Product Application Form below. Email completed forms to the Environmental Services Construction Product List Steward. Contact information is on this page.